Buy RF Connector | Premium RF Coaxial Cables from Torven
Time：Apr 29,2026
Source：
When you search to buy RF connector or high‑quality RF coaxial cables, you need more than just a part—you need stable signal transmission, wide compatibility, and long‑term durability for industrial, communication, and test scenarios. Torven RF coaxial cables and connectors are designed to meet these demands, delivering consistent performance for wireless systems, test instruments, base stations, and military‑grade equipment.
In this guide, we break down our product lineup, key specifications, application advantages, and a complete buying FAQ to help you choose the right solution and easily place an inquiry.
Why Choose Torven RF Coaxial Cables & Connectors?
Torven focuses on stable RF interconnection solutions. Our cables and connectors maintain precise impedance matching, minimize signal reflection and power loss, and support high‑frequency transmission up to 26 GHz—ideal for professional environments where signal integrity matters.
Core Advantages
Stable Impedance Control: Standard 50Ω / 75Ω options for perfect system matching
Low VSWR: Typically 1.0–1.3 for minimal reflection and high transmission efficiency
Wide Frequency Band: Covers 4 GHz–26 GHz to support 5G, microwave, and test applications
Multiple Connection Types: Bayonet, threaded, push‑on, quick‑lock for flexible installation
Broad Compatibility: Works with BNC, SMA, N‑Type, TNC, SMB, QMA, 7/16 DIN, MMCX, MCX, SMP, SSMA, SSMB and more
Strong Environmental Resistance: Stable in vibration, moisture, and temperature extremes
Torven RF Coaxial Cable & Connector Product Line
Our full range supports standard and custom assembly for video surveillance, telecom, base stations, military, RF test, and antenna systems.
Popular Interfaces & Applications
Connector Type | Typical Frequency | Impedance | Typical Applications |
BNC | DC–4 GHz | 50Ω / 75Ω | Video, surveillance, test equipment |
N‑Type | Up to 11 GHz | 50Ω | Base stations, antennas, high‑power systems |
7/16 DIN | Up to 7 GHz | 50Ω | Cellular base stations, industrial RF |
SMA | Up to 26 GHz | 50Ω | Microwave, RF modules, test instruments |
TNC / SMB / QMA | Mid–high frequency | 50Ω | Compact wireless, mobile devices |
MCX / MMCX / SMP | Ultra‑broadband | 50Ω | Miniaturized, high‑density layouts |
Featured Cable Assemblies
Torven provides ready‑made and custom cable assemblies to streamline your project:
CBS‑BNJW‑MJJ Series: BNC to MCX jumper cables for test and monitoring
CBS‑BNK‑MJJ Series: BNC to MCX flexible assemblies
CBS‑FJ‑MJJ Series: F‑type to N‑type for broadcast and CATV
NCB85 Series: Ultra‑small IPX to RF jumper for compact wireless designs
All assemblies use precision‑matched connectors and low‑loss dielectric to ensure low insertion loss and repeatable performance in lab and field use.
How to Select the Right RF Connector & Cable
Use this step‑by‑step guide when you buy RF connector or cable assemblies to avoid mismatches and performance loss.
Match Connector Interface
Confirm the port on your device: BNC, N‑Type, SMA, TNC, 7/16 DIN, etc. Choose male or female based on inner conductor structure (pin = male, socket = female).
Confirm Impedance
50Ω: Wireless, communication, test, military, base stations
75Ω: Broadcast, CATV, surveillance video
Check Frequency & Power
Low‑frequency (≤4 GHz): BNC, some TNC
Mid‑frequency (4–11 GHz): N‑Type, 7/16 DIN
High‑frequency (11–26 GHz): SMA, SSMA, SMP seriesMake sure the connector’s power rating exceeds your system’s average and peak power.
Choose Mechanical Structure
Bayonet (BNC): Fast push‑and‑twist connect
Threaded (N, 7/16 DIN): Vibration‑resistant, high reliability
Push‑on / quick‑lock (SMP, QMA): High density, fast assembly
Environmental Requirements
Select ruggedized, waterproof, or high‑temperature versions for outdoor, vehicle, or industrial use.
FAQ
Q1: What’s the difference between 50Ω and 75Ω RF cables?
A: 50Ω is standard for wireless, telecom, test, and military gear. 75Ω is for video, broadcast, and CATV. Mismatch causes reflection, higher VSWR, and signal loss.
Q2: What VSWR value is good for RF connectors?
A: Torven products achieve 1.0–1.3, which is industry‑leading for low loss and stable transmission.
Q3: Can I use different brands of the same connector type?
A: In most cases yes, but interface dimensions, plating, and tolerance vary. For best performance, use matched cable and connector from one supplier.
Q4: How many mating cycles do your connectors support?
A: Standard types exceed 500 cycles; high‑end types reach 1000+ while maintaining specs.
Q5: Do you offer custom cable lengths and connectors?
A: Yes. We provide custom length, connector combination, jacket type, and shielding based on your needs.
Q6: What’s your lead time for standard and custom orders?
A: Standard models ship in 3–7 business days. Custom assemblies take 1–2 weeks depending on complexity.
Get a Quote & Place Your Order
If you’re ready to buy RF connector or RF coaxial cable assemblies, or need a custom solution, please submit our contact form with your requirements: connector type, gender, impedance, frequency, cable length, quantity, and application. Our engineering team will reply within 24 hours with a professional solution and competitive price.
Torven is your trusted supplier for high‑reliability RF interconnection products. We support bulk orders, long‑term contracts, and OEM/ODM projects.
Contact us now to get free selection support and a tailored datasheet!
Apply Here For A Custom Made Solution
Shenzhen Torvenics Electronic Co.,Ltd.
615 Block A, No.11 Tangkeng Road,Henggang Longgang Dist,Shenzhen China