Company EventsTech EventsIndustrial NewsHelp CenterExhibition News
Home /  Tech Events /  Precautions to prevent electrical connectors from overheating are detailed
Precautions to prevent electrical connectors from overheating are detailed
Release:Shenzhen Torvenics Electronic Co.,Ltd Data:2023/04/14

(1)      When a sign of failure is found, the electrical connector of the power cord should be disassembled and the conductive column in the socket of the electric water heater should be unscrewed, polished with a zero emery cloth or abrasive paste until bright, and the wire, wiring screw, tongue and oxide layer of the conductive column in the socket on the electric water heater should be removed from the contact between the power cord and the electrical connector at the tongue connection, so as to reduce the contact resistance. D-SUB Connectors

(2)      Apply a little conductive paste to the power cord connector tab and the socket lead post of the electric water heater.

(3)      The tongue and wiring screws on the electrical connector are seriously burned and should be replaced immediately.

(4)      If the socket and conductive column on the electric water heater are seriously burned, they should also be removed immediately and replaced with sockets and conductive columns of the same specification. When installing an electric water heater socket, a power gate knife switch should be installed.

You May Like RELATED PRODUCTS
Copyright © 2022 Torvenics All rights reserved | FPC connectors 粤ICP备18055225号 [Bmap] [Gmap]
Mail:Info@torvenics.com Skype